TOX PRESSOTECHNIK
RO: +40 268 306366

TOX®-Powerpackage RZ

The robot tongs drives - not only for robot applications

The robot tongs version of the pneumohydraulic TOX®-Powerpackage is equipped with proven power bypass and end position damping.

 

With enhanced precision and adjustable flange mounting, these pneumohydraulic drives require no additional guidance or carriage for the tooling.

 

These drives are perfect for the TOX®-Clinching process or punching. Other applications are also possible.

 

The robotic press drives can be operated in any position.

TOX®-Powerpackage Type RZK
Press force: 52 - 82 kN
Power stroke: 7 / 12 mm
Total stroke: 100 / 200 mm
Operating pressure: 6 bar

Compact design optimized for robotic operated or mobile hand tongs.

Available series

  • Version 44: total stroke adjustment for the last 10 mm of stroke.
  • Version 45:total stroke adjustment for the last 50 mm of stroke (available only for 200 mm total stroke).

Searching for a simpler but similar cylinder? Look at TOX®-Powerpackages type X-K.

Used in several hundreds of applications world wide!

Features

  • Adjustment of the total stroke on the RZK, e. g. for the control dimension X during clinching, is possible by the total stroke adjustment.
  • The end position can be monitored using a sensor for dimension X, which is mounted on the end flange of the RZK.
  • Including pneumatic spring, power bypass ZLB, hydraulic return stroke damping ZHD, manually switchable power stroke valve for setting and maintenance.
  • Valve block ZVX including approach stroke support and throttle “X”. Requires only two pneumatic connections for approach and return stroke.
  • 6 bar design.
TOX®-Powerpackage Type RZS
Press force: 55 - 84 kN
Power stroke: 7 mm
Total stroke: 100 mm

Perfect cylinder for presses, where you want to save on the tool guide carriage.

Slim and cost-effective!

Features

  • Adjustment of the total stroke on the RZS, e. g. for the control dimension X during clinching, is realised at the TOX®-Tool using precision shim plates. A direct adjustment on the RZS is not possible. If this function is necessary, either the type RZK or RZH with total stroke adjustment is recommended.
  • The end position can be monitored using a sensor for the dimension X, which is mounted on the end flange of the RZK.
  • Including pneumatic spring, power bypass ZLB, hydraulic return stroke damping ZHD, defined end position stop with damping.
  • Switch for dimension X can be mounted on working piston. Ready for mounting of end position monitoring ZHU or external linear position sensor ZHW.
  • Valve block ZVX including approach stroke support and throttle “X”. Requires only two pneumatic connections for approach and return stroke.
  • 6 bar design.

Recommended acessoires

TOX®-Hydraulic Cylinder Type RZHL and RZHO
Press force: 55 - 92 kN
Total stroke: 50 -200 mm

Perfect if you need a light weight hand tongs or if you want to operate several hydraulic cylinders by one intensifier. Any power stroke can be realised.

Versions RZHL and RZHO

The hydraulic cylinder RZH(x) is available in two basic versions. The type of pressure media used for the return stroke determines the type of cylinder: RZHL for pneumatic return stroke or RZHO for hydraulic return stroke.

RZHL: The hydraulic cylinder type RZHL can be combined with the TOX®-Intensifier X-ES.

RZHO: The hydraulic cylinder type RZHO can be driven by any hydraulic aggregat.

 

Available series

  • Version 00: total stroke adjustment for the last 10 mm of stroke.
  • Version 30: total stroke adjustment for the last 50 mm of stroke.
  • Version 200: total stroke of 50 mm without stroke adjustment.

Features

Adjustment of the total stroke on the RZH(x), e. g. for the control dimension X during clinching, is possible by the total stroke adjustment (version .00 and .30). For version .200 the adjustment is realised at the TOX®-Tool using precision shim plates.

Brochures & Data Sheets

Brochure TOX®-PowerpackageData sheet 10.08: TOX®-Powerpackage RZ
Close
Data sheet 10.08: TOX®-Powerpackage type RZK, RZS, RZH

All brochures & data sheets

Go to downloads

Applications

Clinching
Clinching is a cold-forming process that allows sheet metal and other materials to be fastened together without the need for bolts, rivets, or adhesives.
Read more
ClinchingClinching
Pressing
There are lots of application possibilities for the TOX®-Tongs, pressframes and presses
Read more
PressingPressing
Assembling
Pressing-in and mounting of bushings and bearings, production of precise force-fitting assemblies
Read more
AssemblingAssembling
Fastener insertion
Complete system solutions for the insertion of function elements
Read more
InsertingInserting
Coining
You have to identify your products? You need to hold a part safely for additional work?
Read more
CoiningCoining
Riveting
We offer you standardized but highly flexible products for riveting, crimping, flaring...
Read more
RivetingRiveting
Punching
It does not matter whether you want to process sheet metal, plastics, cardboard, textiles or foils
Read more
PunchingPunching

Address

Lang & Sin SRL
Str. Crisului nr. 16
500283 Brasov
Phone: +40 268 306366
Fax: +40 268 306367
Contact
RO: +40 268 306366 Contact form
©TOX® PRESSOTECHNIK GmbH & Co.KG
 
Cookie Information

We use cookies to give you the best possible experience when using our website. You can block or regulate the use of cookies by adjusting your browser settings accordingly.