TOX PRESSOTECHNIK
RO: +40 268 306366

Mechanics & Sensors of the servo press drives

The intelligent servo press with precision mechanics

With TOX®-EdgeUnit, every TOX®-ElectricPowerDrive becomes an intelligent component within the network

  • Supply with 24 V
  • Internal fieldbus: EtherCAT
  • Status LED
  • Integrated memory for
    • maintenance counter, stroke counter
    • drive date, calibration factor

Extend the servo press without additional hardware with the components selected by you by means of comprehensive interfaces on the TOX®-ElectricPowerDrive:

  •  Additional force input 16 bit ADC (e.g. for external DMS)
  • 2 digital inputs / 2 digital outputs
  • 2 analog inputs (e.g. for external travel sensor, piezo force sensor)
  • Encoder input (e.g. for TTL measuring sensor)
     

INTEGRATED FORCE SENSOR

  • Integrated in the housing as standard (exception: EQe-K 002)
  • 4x DMS with <0.5 % measuring accuracy
  • Independent of room position, compensated in itself
  • Internally connected with the TOX®-EdgeUnit
  • Measuring amplifier and 16 bit ADC

to the accessory sensor overview

INTEGRATED POSITION MEASURING

  • Resolver integrated on the motor as standard (absolute encoder optional)
  • Resolver data are used for closed loop control of the motor
  • Calculation of the piston movement based on the resolver data
  • Theoretical position measuring up to 1.06 µm
  • Distance repeat accuracy of +/- 10 µm

The spindle makes the difference

BALL SCREW

  • Compact design and reasonably priced
  • Long service life

A typical application example is pressing.

PLANETARY THREADED SPINDLE

  • High power density, rigidity and very long service life
  • Very small design

Typical application examples are punching, press applications with high joining speeds or press applications in limited installation spaces.
 

Let us know your requirements - we will dimension the optimum drive system for you. We can optimize your solution with our versions:

  • Long holding time of the force
  • Reduced cooling time
  • Force pulling or punching process
  • Increased speed
  • And much more
     

Operating principle of the servo press

This content is blocked due to restrictions of your browser/firewall
Summary of servo press types

The reasonably priced servo drive EQe-K

  • Cost efficient
  • Stroke length: 150, 300, 450 mm
  • Press force: 0.02 – 100 kN
  • Ball screw
  • 4-point force measuring with high measuring accuracy
  • Force repeat accuracy: ≤ +/- 1.0%
  • Distance repeat accuracy: +/- 0.01 mm
     

The flexible servo press for every application: EXe-K

  • Now with cleanroom certification! According to ISO 14644-1 applicable up to air purity class 5.
  • High power density with low weight
  • Stroke length: 150, 300, 450 mm
  • Press force: 10 - 200 kN
  • Planetary threaded spindle
  • Highly accurate 4-point force measuring
  • Accuracies: Force: ≤ +/- 0.5%
  • Distance repeat accuracy: +/- 0.01 mm
  • Low space requirement
  • Customized configuration possible
     

Extremely fast: EXe-F

  • Extremely fast and highly dynamic
  • Designed for permanent operation
  • Planetary threaded spindle
  • Highly accurate 4-point force measuring
  • Accuracies: Force: ≤ +/- 0.5%
  • Distance repeat accuracy: +/- 0.01 mm
  • Customized configuration possible

High force with compact dimensions: EXe-L

  • Compact and modular design
  • Accuracies: Force: ≤ +/- 0.5% (≤ +/- 1% with EPMK 1000)
  • Distance repeat accuracy: +/- 0.01 mm
  • Planetary threaded spindle
  • Force sensors attached to the housing Customized configuration possible
     

Applications

Clinching
Clinching is a cold-forming process that allows sheet metal and other materials to be fastened together without the need for bolts, rivets, or adhesives.
Read more
ClinchingClinching
Pressing
There are lots of application possibilities for the TOX®-Tongs, pressframes and presses
Read more
PressingPressing
Assembling
Pressing-in and mounting of bushings and bearings, production of precise force-fitting assemblies
Read more
AssemblingAssembling
Fastener insertion
Complete system solutions for the insertion of function elements
Read more
InsertingInserting
Coining
You have to identify your products? You need to hold a part safely for additional work?
Read more
CoiningCoining
Riveting
We offer you standardized but highly flexible products for riveting, crimping, flaring...
Read more
RivetingRiveting
Punching
It does not matter whether you want to process sheet metal, plastics, cardboard, textiles or foils
Read more
PunchingPunching

Address

Lang & Sin SRL
Str. Crisului nr. 16
500283 Brasov
Phone: +40 268 306366
Fax: +40 268 306367
Contact
RO: +40 268 306366 Contact form
©TOX® PRESSOTECHNIK GmbH & Co.KG
 
Cookie Information

We use cookies to give you the best possible experience when using our website. You can block or regulate the use of cookies by adjusting your browser settings accordingly.